The SmallRig 1138 camera clamp review is for creators who want to mount a camera or accessory to a nearby rod, tube, table, frame, or tripod without drilling.
Its dual ball head, 1/4-inch screw, and included action camera adapter offer flexible positioning, while its 1.5 kg maximum load makes it best suited to compact setups.
SmallRig 1138 Clamp Review Summary
The quick verdict

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A versatile clamp for creators who need to secure a lightweight camera or accessory to a rod, tube, table, frame, or tripod.
- Clamp mount with a dual ball head for adjusting the position of attached gear.
- Includes a 1/4-inch-20 screw for mounting cameras, webcams, monitors, lights, microphones, action cameras, and other compatible accessories.
- Locking knob secures the clamp to a rod, tube, table, frame, or tripod without drilling.
- Maximum load capacity is 1.5 kg; plan around the total weight of the mounted equipment.
Pros
- Combines clamping and angle adjustment in one compact mount.
- Works with a range of common camera and production accessories through the 1/4-inch-20 screw.
Consider before buying
- The 1.5 kg maximum load limits its fit for heavier camera or accessory combinations.
- Dynamic setups call for an additional safety rope, which should be included in the rigging plan.
Read the full review summary
The SmallRig 1138 combines a super clamp with a dual ball head and a 1/4-inch-20 screw, so one mount can attach to a support and position a camera, webcam, monitor, light, microphone, action camera, or other compatible gear.
The supplied adapter adds an action-camera mounting option, and the clamp is designed for quick securing with a locking knob.
Its aluminum and stainless steel construction and non-slip threads with an anti-twist structure are aimed at a firmer hold, with a stated maximum load of 1.5 kg.
It suits desk filming, compact camera rigs, and other setups where a convenient clamping point is available; for dynamic use, the maker advises attaching a safety rope.
The buying factors
SmallRig 1138 Clamp Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Mounting flexibility
The clamp can attach to several kinds of supports, and the dual ball head gives room to adjust the mounted gear.
Accessory compatibility
The 1/4-inch-20 screw and included action-camera adapter cover several common compact camera and production accessories.
Load range
A 1.5 kg maximum supports lightweight gear, but sets a clear ceiling for heavier equipment.
Build materials
Aluminum and stainless steel are used in the clamp, with non-slip threads and an anti-twist structure.
Setup convenience
The locking knob and clamp-on design provide a straightforward way to attach the mount where a suitable support is available.
Dynamic-use readiness
It can serve mobile setups, but the maker specifically recommends a safety rope in dynamic scenarios.
Key Features and Specifications of SmallRig 1138 Clamp
- Clamp mount with a dual ball head for adjusting the position of attached gear.
- Includes a 1/4-inch-20 screw for mounting cameras, webcams, monitors, lights, microphones, action cameras, and other compatible accessories.
- Locking knob secures the clamp to a rod, tube, table, frame, or tripod without drilling.
- Maximum load capacity is 1.5 kg; plan around the total weight of the mounted equipment.
- Constructed from aluminum and stainless steel, with non-slip threads and an anti-twist structure.
- Package includes the super camera clamp and an action camera mount adapter.
- For dynamic use, attach a safety rope to help prevent an accidental drop.
Pros and Cons of SmallRig 1138 Clamp
Pros
- Combines clamping and angle adjustment in one compact mount.
- Works with a range of common camera and production accessories through the 1/4-inch-20 screw.
- Includes an action camera adapter, expanding the mounting options in the package.
- Clamp-on installation can avoid drilling when a suitable support is already available.
Consider before buying
- The 1.5 kg maximum load limits its fit for heavier camera or accessory combinations.
- Dynamic setups call for an additional safety rope, which should be included in the rigging plan.
- The setup depends on having a compatible rod, tube, table edge, frame, or tripod point to clamp onto.
Who Should Buy SmallRig 1138 Clamp?
Good fit
Consider the SmallRig 1138 if you need to position a lightweight camera or accessory from an existing support point.
A desk edge, tube, rod, frame, or tripod can provide a clamping location, while the dual ball head helps orient the attached gear without changing the support itself.
It is especially relevant for compact creator setups that use a 1/4-inch-20 connection or an action camera.
Before buying, check that the support you plan to use is suitable for a clamp and that the complete load stays within the 1.5 kg maximum.
For vehicle, bike, or other moving use, account for the recommended safety rope.
Who should skip it
Choose another mounting approach if your rig exceeds the 1.5 kg maximum or has no appropriate support point for the clamp.
This is a less suitable choice for dynamic mounting if you cannot attach a safety rope as advised.
How the SmallRig 1138 Clamp Fits a Compact Rig
One mount for support and positioning
The clamp grips a nearby support while the dual ball head positions the accessory at the other end. This can simplify small filming setups that need a camera, monitor, light, or microphone held beside a desk or rig.
The practical benefit depends on having a stable, compatible surface or tube to grip.
Check the load as a complete setup
The 1.5 kg maximum applies to the mounted equipment, so consider the combined weight of the device and any attached accessories.
Staying comfortably within the stated limit gives a more suitable use case than asking this compact mount to carry a heavier configuration.
Plan for movement
The clamp is listed for uses that include vehicles and bicycles, but the guidance specifically calls for a safety rope in dynamic scenarios.
Treat that as part of the setup: secure the rope, check the attachment points, and consider whether the mounting location is appropriate for the motion involved.
Confirm the connection before assembling
The main accessory connection is a 1/4-inch-20 screw, and an action camera adapter is included.
Check the connection required by your camera or accessory before purchase, particularly if you intend to switch among several devices or use a larger rig.
Alternatives to SmallRig 1138 Clamp
Camera Mounts & Clamps alternative

3,000+ ratings
Read Amazon ReviewsSmallRig 2732 9.8-Inch Magic Arm Clamp Kit
Choose the 1138 if you want the included action camera adapter and a direct dual-ball-head arrangement. Consider the 2732 if a longer articulating arm and its additional 3/8-inch clamp thread better match your rig.
- The 2732 pairs a super clamp with a 9.8-inch articulating arm.
- Its clamp has 1/4-inch and 3/8-inch threads, opens from 15 mm to 54 mm, and the arm has 1/4-inch screws at both ends.
- The 1138 combines a super clamp, dual ball head, and 1/4-inch-20 screw, and includes an action camera adapter; its maximum load is 1.5 kg.
Camera Mounts & Clamps alternative

800+ ratings
Read Amazon ReviewsSmallRig 4103 Double Clamp Mount
The 1138 is the simpler fit when one clamp point and a 1/4-inch-20 accessory connection suit the setup.
Consider the 4103 when you need a double-clamp arrangement for compatible rods and its higher stated load better fits the equipment.
- The 4103 uses two clamps with a 360-degree double ball head and supports rods from 14 mm to 60 mm in diameter.
- Its stated maximum load is 3.5 kg.
- The 1138 clamps onto a support and offers a 1/4-inch-20 accessory screw, with a stated maximum load of 1.5 kg.
Is SmallRig 1138 Clamp Worth It?
The SmallRig 1138 is worth considering for lightweight camera and accessory setups that need a flexible clamp-on mounting point. Its dual ball head, 1/4-inch-20 connection, and included action camera adapter make it adaptable to compact creator rigs.
Buy it if your support point is compatible and your total mounted load stays within 1.5 kg. For moving setups, follow the safety-rope guidance; for heavier equipment, choose a mount designed for the required load.
Your review at a glance

8,000+ ratings
Read Amazon ReviewsSmallRig 1138 Super Camera Clamp
A versatile clamp for creators who need to secure a lightweight camera or accessory to a rod, tube, table, frame, or tripod.
- Clamp mount with a dual ball head for adjusting the position of attached gear.
- Includes a 1/4-inch-20 screw for mounting cameras, webcams, monitors, lights, microphones, action cameras, and other compatible accessories.
- Locking knob secures the clamp to a rod, tube, table, frame, or tripod without drilling.
- Maximum load capacity is 1.5 kg; plan around the total weight of the mounted equipment.